HIKVISION 2MP ,INDOOR, FIXED LENS, CUBE CAMERA(120db WDR) 1/2.8" Progressive CMOS, ICR, ICR, 0.01lux/F1.2, 1920x1080: 25fps(P)/30fps(N), 4mm/F2.0 lens (2.8/6mm optional), H.264/MJPEG, dual-stream, DC12V & PoE, 120dB WDR, 3D DNR, BLC, IR range: up to 10m, support on-board storage up to 128GB(SD card not included), built-in WIFI, H.264+ Optimized Codec
| Product Name | HIKVISION DS-2CD2422F-IW 2MP INDOOR CUBE IP CAMERA WITH WIFI |
| Product Code | |
| Brand | Hikvision |
| Camera | Image Sensor:1/2.8" Progressive Scan CMOS |
| Min. Illumination | 0.01Lux @ (F1.2, AGC ON) ,0 Lux with IR 0.028Lux @ (F2.0, AGC ON) ,0 Lux with IR |
| Shutter Speed | 1/3 s to 1/100,000 s |
| Lens | 4mm@ F2.0, Angle of view: 85°(6mm optional) |
| Angle of view | 85°(6mm, 12mmoptional) |
| Lens Mount | M12 |
| Day &Night | IR cut filter with auto switch |
| Digital Noise Reduction | 3D DNR |
| Wide Dynamic Range | Digital WDR |
| Compression Standard | |
| Video Compression | H.264/ MJPEG |
| Video Bit Rate | 32 Kbps –8 Mbps |
| Dual Stream | Yes |
| Audio Compression | G.711/G.722.1/G.726/MP2L2 |
| Audio bit rate | 64Kbps(G.711) /16Kbps(G.722.1)/16Kbps(G.726) /32-128Kbps(MP2L2) |
| Image | |
| Max. Resolution | 1920× 1080 |
| Frame Rate | 50Hz: 25fps(1920 × 1080), 25fps (1280 × 960), 25fps (1280 × 720) 60Hz: 30fps(1920 × 1080), 30fps (1280 × 960), 30fps (1280 × 720) |
| Image Settings | Rotate mode, Saturation, rightness, Contrast adjustable by client software or web browser |
| Backlight compensation | Yes, zone optional |
| ROI | Yes |
| Network | |
| Network Storage | NAS |
| Alarm Trigger | Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception |
| Protocols | TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,PPPoE,NTP,UPnP,SMTP,SNMP,IGMP,802.1X,QS,IPv6,Bonjour |
| General Functions | One-key reset, flash-prevention, dual streams, heartbeat, mirror, password protection, privacy mask, Watermark, IP address filtering, Anonymous access |
| Standard | ONVIF, PSIA, CGI, ISAPI |
| Interface | |
| Communication Interface | 1 J45 0M/100M Ethernet interface |
| Reset Button | Yes |
| Alarm Input | 1 |
| Alarm Output | 1 |
| Wi-Fi Specification (-W) | |
| Wireless Standards | IEEE802.11b, 802.11g, 802.11n |
| Frequency Range | 2.4 GHz ~ 2.4835 GHz |
| Channel Bandwidth | 20/40MHz Support |
| Security | 64/128-bit WEP, PA/WPA2, WPA-PSK/WPA2-PSK, WPS |
| Transmission Rate | 11b: 11Mbps,11g: 54Mbps11n: up to 150Mbps |
| Wireless Range | 50m(depend on environment) |
| Protocols | 802.11b: CCK, QPSK, BPSK802.11g/n |
| General | |
| Operating Conditions | -30 °C –60 °C (-22 °F –140 °F) |
| Humidity | 95% or less (non-condensing) |
| Power Supply | 12 V DC ± 10% , PoE (802.3af) |
| Power Consumption | Max. 4.5W |
| IR Range | 10 meters |
| Dimensions | 72.3×89.9×131.3 |
| PIR | Angle: 80° |
| Weight | 400g |
| NOTE | "-W" series support Wi-Fi (802.11b/g/n) and the modules with Wi-Fi function don’t support the 802.1X protocol. |
