| Product Name |
HIKVISION DS-2CD2942F-I 4MP FISH EYE CAMERA |
| Product Code |
HV312090 |
| Brand |
Hikvision |
| Camera |
|
| Image Sensor |
1/3" Progressive Scan CMOS |
| Min. Illumination |
Color: 0.01lux @(F1.2, AGC ON), 0.018lux @(F1.6, AGC ON), 0 lux with IR |
| Shutter time |
1/3 s ~ 1/100,000 s |
| Slow shutter |
Support |
| Lens |
1.6mm, F1.6 Angle of view: 186°(horizontal), 106°(vertical) |
| Lens Mount |
M12 |
| Day& Night |
Electronic (-I: IR cut filter with auto switch) |
| Compression Standard |
|
| Video Compression |
H.264/MJPEG |
| H.264 code profile |
Baseline Profile / Main Profile |
| Video bit rate |
32Kbps~8Mbps |
| Audio Compression |
G.711/G.722.1/G.726/MP2L2 |
| Audio bit rate |
64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2) |
| Image |
|
| Max. Image Resolution |
2560 × 1440 |
| Frame Rate |
50Hz: 12.5fps(2560 × 1440), 25fps(1920 × 1080, 1280 × 720) 60Hz: 15fps(2560 × 1440), 30fps(1920 × 1080, 1280 × 720) |
| Image Enhancement |
BLC/3D DNR/ROI/Defog |
| Image Settings |
Saturation, Brightness, Contrast , Hue, Sharpness, AGC, White Balance |
| Day/Night Switch |
Auto/Schedule/Triggered by Alarm In |
| Network |
|
| Network Storage |
Built-in Micro SD/SDHC/SDXC slot, up to 128G, NAS(NFS, SMB/CIFS) |
| Alarm Trigger |
Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception |
| Protocols |
TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
| General Function |
User Authentication, Watermark, IP address filtering |
| System Compatibility |
ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI |
| General |
|
| Operating Conditions |
-10 °C –40 °C (-22 °F –140 °F) |
| Humidity |
95% or less (non-condensing) |
| Power Supply |
12 V DC ± 10% , PoE (802.3af) |
| Impact ProtectionIK10 |
|
| Power Consumption |
Max. 5W |
| Ingress Protection level |
IP67 |
| IR Range |
10 meters |
| Dimensions |
Φ111 × 82 (4.4†× 3.2â€) |
| Weight |
600g |
| NOTE |
"-W" series support Wi-Fi (802.11b/g/n) and the modules with Wi-Fi function don’t support the 802.1X protocol. |